Show the trade-offs
Oak veneer
- Best for
- A warm continuous surface where grain continuity hides the opening.
- Watch out
- Grain matching across a door line needs sequencing at the factory, not on site.
Cost and scope2
- Relative cost
- Higher.
- Consequential work
- Veneer sequencing must be specified; a standard order will not match.
Paint matched
- Best for
- The simplest concealment — the door reads as wall.
- Watch out
- Any movement or settlement shows at the joint, and touch-up paint rarely matches exactly.
Cost and scope2
- Relative cost
- Low.
- Consequential work
- Requires a decided shadow gap or flush tolerance the painter can actually hold.
Sintered stone
- Best for
- A hard, wipeable feature wall where the door is part of a stone-faced plane.
- Watch out
- Weight is the issue — the leaf and its hardware must be specified for it.
Cost and scope2
- Relative cost
- Higher.
- Consequential work
- Hardware must be sized for the leaf weight; this is an engineering check, not a preference.
Wallpaper mural
- Best for
- A graphic wall where the image should run across the opening.
- Watch out
- The mural must be hung with the door line planned into it; a repair means re-hanging a section.
Cost and scope2
- Relative cost
- Moderate.
- Consequential work
- The door position must be final before the mural is ordered and set out.
One option isn't shown yet — coming soon: Oak fluting.