This is a checklist of what ELS checks when it plans a wardrobe. It is a checklist, not a promise: it does not say any wardrobe passes every check, and a check is not an approval.
Measure before designing
ELS checks that walls, floor level, ceiling, skirting, beams and obstructions are measured before design.
Plan actual storage needs
ELS checks the quantities of long clothes, short clothes, folded items, shoes and accessories.
Protect circulation
ELS checks that hinged doors, drawers and pull-outs do not collide with beds, doors or furniture.
Verify usable depth
ELS checks that clothes hang without being crushed against the doors.
Control tall-door geometry
ELS checks door weight, material stability, hinge quantity and sag risk.
Divide cabinets structurally
ELS checks that carcass partitions, supports and top-storage access are shown.
Control exposed finishes
ELS checks that end panels, door grain, edge returns and filler strips are intentional.
Specify complete edge sealing
ELS checks that machined edges, cut-outs and vulnerable exposed board are protected.
Match hardware to the load
ELS checks the hinge, runner and hanging-rail ratings and the mounting substrate.
Prove corner accessibility
ELS checks that every corner has a usable opening or is deliberately left out of storage.
Address Sarawak moisture
ELS checks for leaks, damp walls, flooring, ventilation and susceptibility to termites.
Fix cabinets safely
ELS checks wall anchorage, substrate suitability and anti-tip requirements.
Coordinate power and lighting
ELS checks that LED wiring, drivers, switches, sensors and servicing are planned.
Protect fabrication feasibility
ELS checks that each special curve, bevel, unusual junction and oversized panel has a fabrication detail.
Match render to deliverable
ELS checks that each feature a render shows has a material, dimension and hardware status.
Dimension figures on this site are ELS preliminary planning targets, not Malaysian regulatory minimums or substitute fabrication specifications. Each wardrobe still needs its own measurements, drawings and review.